DC1 digital callipers
Digital callipers DC1
CAL-DGT-DC1-(0-150MM)
Art.-no.
0715761215
EAN 4099618095061
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Ergonomic digital callipers with calibration certificate and a measuring range of 150 mm
- Long service life and reliable measurements due to reinforced plastic housing, hardened and ground measuring jaw
- Very easy-to-read display, even from wider viewing angles
- Two-button operation, on/off, zero/switching inch/mm
- Flat depth gauge for precise depth measurements
- Easy transfer of measurement results using the locking screw on the top to lock
- Tool-free battery replacement, including R2032 battery
- Automatic shutdown after 20 minutes
- Thread table on the rear of the housing
- Supplied with factory calibration certificate
Notice
- Keep the callipers clean and dry. Fluid can damage the slide
- Surfaces should be carefully cleaned with cotton fabric
- Never use petrol, acetone or other organic solvents
- Never apply voltage to parts of the digital callipers (e.g. engraving with an electric pin) as this may damage the circuit
Product information
Datasheets(X)
Application areaFor mechanical engineering, metalworking, workshops, quality control, etc.
InstructionsRead User instruction manual before start to use the calliper.
Clean and dry the digital calliper and objects to be measured.
Clean and dry the digital calliper and objects to be measured.
Absolute length measuring accuracy | 0.02 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Length of measuring tip | 24 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!