Welcome to Würth Industry For trade customers only

Diesel combustion chamber cleaner

Combustion chamber cleaner Diesel
COMBUCHAMCLNR-DISL-300ML

Art.-no. 5861012300
EAN 4050642910089

Prices for customers after login

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 125,000 products

For cleaning the injection system and the combustion chamber to enable combustion with little soot and fewer particles.

Cleans the fuel system, the combustion area and the injection system


  • Fuel consumption is thus optimised

  • Improves emission figures


Loosens deposits, oil carbon and soot


  • Reduces emissions figures

  • Use prior to emissions tests (ASU)


Restores the engine's full power


Optimises fuel consumption

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For all passenger car and truck diesel engines.

Instructions

Add the contents of the can to tank. When doing so, the fuel quantity should match the spare tank volume. We also recommend changing the fuel filter after cleaning. Use with increased soot build-up.

Contents

300 ml

Colour

Brown

Smell/fragrance

Aromatic

Chemical basis

Hydrocarbon

Shelf life from production

24 Month

Density

0.839 g/cm³

Density conditions

at 20°C

Min. flashing point

62 °C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information