Designer shelf support with guide pins
Design shelf support with adapter
SHLFSPRT-INSERT-DESIGN-PL-ZD-(NI)-PLUGD5
Art.-no.
0683311131
EAN 4049557887029
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
The nickel-plated designer shelf support is made from die cast zinc.
- High break resistance and high-quality surface
- Height ratio of central drill hole in cabinet side to bottom edge of the shelf = 1.5 mm
- Load capacity: 6.5 N/dm² (four supports in accordance with DIN EN 14749)
Specified dimensions not binding. Subject to technical changes!
Product information
Datasheets(X)
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Drill diameter | 5 mm |
Min. drill hole depth | 8 mm |
Length (L) | 20.8 mm |
Width | 6 mm |
Height | 18 mm |
Stud diameter | 5 mm |
Length of pin | 6 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!