Dent removal tool Dent Killer
Dent repair tool
DNTREPSYS-WELD-DELLENKILLER-COMPL-CASE
Register now and access more than 125,000 products
Enables bodywork dents to be repaired from the outside
Eliminates need for time-consuming removal of interior panelling
Short welding times (approx. 0.3 sec.) and instant cooling only heats sheet metal on the surface
Easy to use
Supplied in plastic case with pin electrode, pin wrench and 1/4" plug connection
Sound level in line with DIN 45635, part 1/04.84-KL2
Datasheets(X)
For dent removal tasks such as:
- Hail damage
- On double-walled bodywork areas
- Long scratches and scuffs
- Major and minor dents
1. Connect Dent Killer to transformer
2. Sheet metal must be stripped
3. Position pin electrode at lowest position and adjust the height stop
4. Weld on the pin electrode by moving the power button until it clicks
5. Pull the sheet metal up and cool immediately by fully pressing power button
Length | 190 mm |
Width | 80 mm |
Height | 170 mm |
Min./max. operating pressure | 6-8 bar |
Min. operating pressure | 6 bar |
Max. operating pressure | 8 bar |
Suitable for hose internal diameter | 4 mm |
Max. acceleration | 2.5 m/s² |
Sound-pressure level | 66 dB |
Included in delivery | Pin electrode, pin wrench and 1/4" plug-in nipple |
Product weight (per item) | 3500.000 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!