D30 sanded bitumen sealing collar
Sealing collar D30 bitumen sanded
SEALCOLAR-F.ANCPT-D30-WP-BIT
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Bezel for sealing single anchor points and other bushings
- Sanded bezel for sealing single anchor points, pipes, cables and lines
- Against water ingress on bitumen roofing membranes
- Suitable for a wide range of roofing membranes (e.g. Alkor, Bauder, Flag, Sika, Sucoflex, Vedag, Mapei)
Notice
- Observe the installation instructions and technical regulations for sealing (flat roof directive of the German central association for the roofing trade)
- The free end must be sealed against penetration with heat-shrink tubing to prevent water from entering
- PP heat-shrink tubing 55/16 with a length of 10 cm is included in the scope of delivery
Product information
Datasheets(X)
Application area
Against water ingress on exposed flat roofs.
Product weight (per item) | 0.787 kg |
Material | Bitumen |
Diameter | 430 mm |
Diameter of hole | 30 mm |
Diameter of hole 2 | 36 mm |