Curved piece For Favor clamping element
Curved Piece Favor
CRVPCE-FAVOR-(S355)-16/20
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
These clamping elements are used to connect threaded rods or pull rods with steel constructions. Steel casting S355, plain.
- Enhance welding suitability compared to curved pieces produced from malleable iron
- The connections can only transfer tensile forces from the secondary beams
- Can be adapted to the relevant inclination between the pull rod and steel construction
Notice
A clamping element consists of a curved piece and a shim ring.
Only intended for frameworks with primarily static loading.
General construction permit Z-14.4-670
Product information
Datasheets(X)
Application area
- Connection component system for attaching tie rods to steel profiles
- Connection of roof or wall secondary beams in hall construction
- Wind, stabilisation and cross bracing in steel constructions
Instructions
The curved pieces are positioned over the slot provided in the steel beam and welded.
 | |
Suitable for tie rod | M20 |
Material | Cast steel |
Surface | Plain |
RoHS-compliant | Yes |
Length (l1) | 63 mm |
Elongated hole length (l2) | 45 mm |
Width (b1) | 42 mm |
Elongated hole width (b2) | 22 mm |
Height (h1) | 32 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!