Bastam três passos para se registar e utilizar todas as funções oferecidas pela loja online.
Vendas apenas a clientes profissionais
O código QR já não é válido. Clique no botão seguinte para ativá-lo novamente.
Ordenar por
52 item(ns) com 545 versões encontrado(s)
PLA NX2 is made from a renewable biopolymer. It combines good mechanical properties with a high degree of flexibility. It is suitable for industrial use, rapid prototyping, architecture, food applications etc. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Polyethylene terephthalate glycol (PETG) is one of the worlds best-known thermoplastic polymers. Extrudr PETG was developed for a wide range of applications for which the main requirement is a good balance between mechanical and optical material properties. The raw material is certified in accordance with FDA, REACH and RoHS standards. PETG is flame-retardant in line with UL 94 with a wall thickness of 3.2 mm.
Technical filament made of polyamide modified for 3D printing.
BVOH is a water-soluble support filament.
PCTG is a modified copolyester for the highest industrial requirements. The material combines high chemical and thermal resistance with mechanical properties such as high impact strength, high scratch resistance and excellent optical luminosity. In addition, the PCTG has flame-retardant properties in accordance with UL94 V2 and HB. It also meets numerous certifications (cosmetics, FDA, Reach, RoHS).
ABS filament that boasts excellent heat resistance and a hard scratch-resistant surface. Due to its many advantages, ABS plastic is used in a variety of applications outside of 3D printing, including in many household and consumer products.
Extrudr BioFusion is a new generation of special organically based materials developed for designers and makers. The material is available in lively colours. The raw material is approved in accordance with REACH, RoHS and FDA standards.
PLA is a biodegradable polymer with a low melting point that is particularly easy to print.
Made from high-quality PET, easy to print and with a large printing operating window.
Combines easy processability and very low moisture absorption with excellent strength.
PLA PRO1 is an extremely versatile, robust bio-based PLA filament for professionals. It reduces the printing time (depending on the printer and object) and the strength outperforms the mechanical properties of printed ABS parts. Printer settings can be adjusted to achieve extremely high speeds or an unrivalled surface finish. Ultrafuse® PLA PRO1 has been developed as a high-speed engineering thermoplastic that is as easy to print as PLA at speeds previously considered unfeasible. Nevertheless, it has far superior mechanical properties that even surpass printed ABS objects - something that the most demanding users always had to compromise on before Ultrafuse® PLA PRO1.
TPU FLEX is a durable elastomer based on polycaprolactone polyester. It was specially developed for industrial applications and is excellently suited to the production of elastic and damping components. The material is optimised for the FFF/FDM process in terms of thermal stability and better flow properties. The raw material complies with REACH and RoHS standards.
DuraPro ABS was specially developed for industrial applications and is marked by its high level of process reliability. It is excellently suited for the production of components under high mechanical stress. The material is electrically insulating. DuraPro ABS is optimised for good layer adhesion, thermal stability, better flow properties and low warping. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Ultrafuse® ABS Fusion is an engineering material that is easy to print and enables a much more efficient printing process.
Ultrafuse® PAHT CF15 is a high-performance 3D printing filament that opens up new application areas in FFF printing. It can be used in any FFF printer with a hardened nozzle. It is also compatible with BVOH, a water-soluble support material, and HiPS, enabling complex geometries to be printed for the most demanding operating environments. Ultrafuse® PAHT CF15 combines high levels of temperature and chemical resistance with excellent mechanical strength. Its excellent dimensional stability means there is minimal shrinkage of the printed component during printing, allowing for a straightforward printing process. The properties of the fibres ensure that the parts remain very strong and extremely stiff.
Technical filament made of polyamide modified for 3D printing with additional carbon fibre filler.
TPU 85A (Shore hardness 85A) is based on BASF Elastollan®, which is synonymous with reliability, consistent product quality and cost efficiency.
Ultrafuse® PC GF30 is a unique blend of PC and 30 % fibreglass specially developed for FFF printing. With a high level of heat resistance and good dimensional stability, Ultrafuse® PC GF30 is the ideal material for use in an industrial environment in which good temperature resistance and a high level of strength are required. Its UL94 V0 rating makes PC GF30 the perfect solution for applications in the transport industry requiring flame protection. Resistance to UV light and low moisture absorption make Ultrafuse® PC GF30 particularly suitable for indoor and outdoor applications.
TPU 95A (Shore hardness 95A) is based on BASF Elastollan®, which is synonymous with reliability, consistent product quality and cost efficiency.
PA offers high strength, rigidity and good thermal distortion stability.
PLA NX1 is made from a sustainable biopolymer that offers good mechanical properties. The material is suitable for industrial use, rapid prototyping, architecture, food applications etc. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Extrudr PEARL is made from renewable raw materials and developed for rapid prototyping applications. The material offers excellent tensile strength properties. The raw material is approved in accordance with REACH, RoHS and FDA standards.
ABS is strong and flexible with a high level of heat resistance.
DuraPro ASA is a weatherproof and UV-resistant copolymer for industrial applications. It is marked by a high level of process reliability and is perfect for components under high mechanical stress. The material is electrically insulating. DuraPro ASA is optimised for good layer adhesion, thermal stability, better flow properties and low warping. The raw material is approved in accordance with REACH, RoHS and FDA standards.
Ultrafuse® TPS 90A has been specially developed for fused filament fabrication and features an exceptional soft-touch surface. Ultrafuse® TPS 90A has a soft-touch, non-slip feel that is unique in fused filament fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which produces a particularly smooth surface and makes it the perfect choice for appliance handles and small-series production of seals. Ultrafuse® TPS 90A has been specially developed for fused filament fabrication and delivers an exceptional soft-touch surface. Ultrafuse® TPS 90A has a soft-touch, non-slip feel that is unique in fused filament fabrication. The properties of this material are complemented by low moisture absorption and impressive layer adhesion, which produces a particularly smooth surface and makes it the perfect choice for appliance handles and small-series production of seals.
Ultrafuse® PP GF30 contains 30 % fibreglass specially developed for 3D printing filaments, making Ultrafuse® PP GF30 compatible with any conventional FFF printer. PP has lower moisture absorption than PA, making Ultrafuse PP GF30 fully printable without the need for drying. Combined with its high degree of fibreglass reinforcement and excellent chemical resistance, Ultrafuse® PP GF30 is the preferred filament for particularly harsh environments. Its UV resistance makes it more suitable than any other PP-based filament in applications with direct exposure to sunlight.
Ultrafuse® HiPS is a high-quality engineering thermoplastic widely used in the 3D printing industry as a support material for ABS. But this material has other properties to offer, such as good impact strength, good dimensional stability and easy post-processing. HiPS is an excellent support material for ABS, as there is good compatibility between the two materials and HiPS can be easily removed. This means it is now possible to create ABS models with complex geometries. Our HiPS can be easily post-processed with adhesive or sandpaper.
Não existem mais resultados. Para obter um resultado mais preciso, especifique o seu termo de pesquisa mais detalhadamente.
Verifique ou utilize um termo de pesquisa diferente.
Polyethylene terephthalate glycol (PETG) is one of the world's best-known thermoplastic polymers. Extrudr PETG was developed for a wide range of applications for which the main requirement is a good balance between mechanical and optical material properties. The raw material is certified in accordance with FDA, REACH and RoHS standards. PETG is flame-retardant in line with UL 94 with a wall thickness of 3.2 mm.
3D plastic printing DLP print material
3D plastic printing FFF consumables
3D plastic printing FFF print material
3D plastic printing FFF printer
3D plastic printing FFF spare part
3D plastic printing SLS print material
