Bodywork pull clamp 90° angled down
Bodywork pull clamp, angled 90 degree
PULCLMP-BDYWRK-90DGR-ANGLD
Art.-no.
1952003985
EAN 4056807821306
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For aligning and reshaping bodywork parts using pulling attachment.
- The special design allows access to areas where conventional tension clamps cannot be placed (e.g. recesses in longitudinal beams, lock holes, headlight openings etc.).
- Jaws positioned at right angles to the pull direction, fixed to the component with non-slip properties using the clamping screw.
- The fixed pulling eye can be connected with a slide hammer or a chain using hooks.
Product information
Datasheets(X)
Product weight (per item) | 1357.200 g |