Ablative coating I
Ablative coating I
ABLATCOAT-F.CBLPIP-300ML
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Ablative coating for cable duct system B2
Notice
For detailed information on the cable partition, please refer to the general type approval Z-19.53-2366.
Type approval Z-19.53-2366
Product information
Datasheets(X)
Instructions
Ablative coating I is used for smoke-proof sealing after configuring the cable ducts and inserting the soft foam plug.
2 mm wet coating results in the required coating thickness of 1 mm after drying.
Contents | 300 ml |
Colour | White |
Product weight (per item) | 524.000 g |