Ablation coating I, spreadable for use in system C3
Ablation coating I trowelable
ABLATCOAT-FILR-BCKT-12,5KG
Art.-no.
0893306016
EAN 4099618338649
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Universal paste ablation coating for sealing large openings and joints
- Solvent-free and halogen-free
- Resistant to moisture, for indoor and outdoor use
- Resistant to frost-thaw cycles
- Insensitive to UV radiation
- Resistant to various oils and chemicals
- Free of toxic fumes
- Does not affect plastics such as PE and PVC
Notice
Storage: Protect from frost. Storage at room temperature (+5 °C to +30 °C).
The base material must be dry and free from dust or grease
ETA-17/0105/Z-19.53-2677
Product information
Datasheets(X)
Application area
For use in system [C3]
- Combi AB soft penetration seal
- In system C3 as a component/adhesive between mineral fibreboard and component
- For sealing large openings and joints
- Spreadable
- Ideal application at +5 °C to +30 °C and a relative humidity of less than 85 %
- Curing time of at least six hours
- Volume loss in joint or ring gap filling approx. 10-15 %
Instructions
- 1. Clean the component opening
- 2. Stir the ablation coating to a spreadable consistency
- 3. Use a joint knife to apply the ablation coating to the component reveal and to the cut edges of the mineral fibreboard
Container | Bucket |
Weight of content | 12.5 kg |
Contents | 12.5 l |
Colour | White |
Conditions to maintain shelf life from production | at 5°C to 30°C |
Ultraviolet resistance | Yes |
Density | 1.34 g/cm³ |
Viscosity | 0 mPas |
Moulded density | 1.34 g/cm³ |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!