ASSY 3.0 collated zinc-plated steel partial thread countersunk milled pocket AW
ASSY 3.0 steel zinc plated PT cs head AW collated
SCR-CS-MPK-MG/HOHE-AW20-(A3K)-4,5X60/33
ASSY 3.0
Register now and access more than 125,000 products
- Steel
- Blue galvanised
- Partial thread
- Countersunk milling head
- AW drive
ASSY 3.0 chipboard screws are optimised for use in wooden materials. Use in plastic anchors may cause a reduction in the load-bearing capacity. We therefore recommend only using screws without optimised thread tips in plastic anchors, e.g. Würth ASSY D, prefix number 0151 (countersunk head) and prefix number 0153 (pan head).
ETA-11/0190
Datasheets(X)
Nominal diameter (d) | 4.5 mm |
Length (l) | 60 mm |
Thread length (lg) | 33 mm |
Head type | Countersunk milling pocket head |
Head access hole diameter | 0 mm |
Head diameter (dh) | 8.8 mm |
Head height (k) | 2.85 mm |
Internal drive | AW20 |
Thread type | Wood screw thread |
Thread design | Partial thread |
Thread form | Coarse thread |
Core diameter | 2.9 mm |
Material | Steel |
Surface | Zinc plated |
Screw requiring approval | Yes |
RoHS-compliant | Yes |