Welcome to Würth Industry For trade customers only
1-component liquid plastic Easy - LIQUPLA-1C-EASY-7KG

1-component liquid plastic Easy

1C liquid plastic EASY
LIQUPLA-1C-EASY-7KG

Art.-no. 0838892500
EAN 4053479162409
All versions

Prices for customers after login

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 125,000 products

Fibre-reinforced, solvent-free liquid sealing for hard-to-reach areas
  • Single-component liquid plastic is ready for application immediately after mixing

  • This eliminates the need to incorporate the fleece inlay and enables fast, safe processing

  • Partial amounts can be removed so that remaining material does not need to be disposed of

  • Environmentally friendly, easy-to-use and classified as low-emission

  • Solvent and isocyanate-free

  • High storage stability

  • Highly elastic

  • UV-resistant

  • Alkali-resistant

  • Resistant to hydrolysis

  • Rainproof after approx. 60 minutes

  • Low SD value

  • EC1 Plus certification applies
Notice

The product should be considered as a special solution. We recommend discussing and agreeing the use of Easy 1C liquid plastic in advance with the builder/architect. The humidity should not be below 30 %.

Substrate Pre-treatmentPrimer
TilingGrind off the glazeNot required
FPO, TPO, EPDM roof membrane*Lightly roughen the surface1-component liquid plastic primer special
GFRP/domelight crownClean the surface with acetone cleaner; roughen the surfaceNot required
Glass*Clean the surface with acetone cleaner; roughen the surface Not required
WoodRemove the paint completelyNot required
Wood soft fibreNot requiredNot required
BitumenNot requiredNot required
CopperClean the surface with acetone cleaner; roughen the surfaceRust Stop Quattro
Lightweight concreteNot requiredNot required
Mortar, plastic-modified*Grinding, milling, adhesion and compatibility tests are requiredNot required
Polymer bitumen membranes (PY-E) mod. SBSNot requiredNot required
Plaster/masonryNot requiredNot required
PVC membranesClean the surface with acetone cleaner, roughen the surface1-component liquid plastic primer
PVC moulded parts, hardClean the surface with acetone cleaner; roughen the surface1-component liquid plastic primer
Steel, zinc-platedClean the surface with acetone cleaner; roughen the surfaceRust Stop Quattro
Expandable polystyrene/extruded polystyrene (EPS/XPS)Not requiredNot required
ZincClean the surface with acetone cleaner; roughen the surfaceRust Stop Quattro
Further substrates on request
*Carry out adhesion and compatibility tests
AluminiumClean the surface with acetone cleaner, roughen the surfaceRust Stop Quattro
Paints*Completely remove and grind or millDependent on substrate
TarmacGrinding, millingNot required
ConcreteGrinding, millingNot required
Stainless steelClean the surface with acetone cleaner; roughen the surfaceRust Stop Quattro
ScreedsGrinding, millingNot required

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

1C liquid plastic Easy is a special solution for complex details that cannot be treated or are difficult to treat with fleece cut-offs.

Instructions

The substrate must be clean, dry and free from grease and oil. Residual moisture on mineral substrates does not pose a problem. Cement residues must be removed. Substrate pre-treatment depends on the substrate. Please refer to the substrate table. The surface temperature must also be between 5°C and 35°C. Mask surfaces to be sealed beforehand and apply the material using rollers or brushes in a single work step (3 kg/m2). For more information, please refer to the technical data sheet.

Chemical basis

Polyurethane

Colour

Grey

Density

1.25 g/cm³

Fully hardening/curing conditions

20°C

Suitable for further processing up to

24 h

Able to withstand rain after

60 min

Conditions for ability to withstand rain

at 20°C

Further processing conditions

without other measures

Min. processing temperature

5 °C

Max. processing temperature

35 °C

Max. temperature resistance

80 °C

Solvent-free

Yes

Crack bridging

5 mm

Application quantity in weight/area

3 kg/m²

Container

Bucket

Weight of content

7 kg

Shelf life from production

12 Month

Conditions to maintain shelf life from production

at 10°C to 30°C

12°C 0,35 1,84 3,19 4,46 5,63 6,74 7,75 8,69 9,60 10,48 11,33
14°C 2,20 3,76 5,10 6,40 7,58 8,67 9,70 10,71 11,64 12,55 13,36
15°C 3,12 4,65 6,07 7,36 8,52 9,63 10,70 11,69 12,62 13,52 14,42
16°C 4,07 5,59 6,98 8,29 9,47 10,61 11,68 12,66 13,63 14,58 15,54
17°C 5,00 6,48 7,92 9,18 10,39 11,48 12,54 13,57 14,50 15,36 16,19
18°C 5,90 7,43 8,83 10,12 11,33 12,44 13,48 14,56 15,41 16,31 17,25
19°C 6,80 8,33 9,75 11,09 12,26 13,37 14,49 15,47 16,40 17,37 18,22
20°C 7,73 9,30 10,72 12,00 13,22 14,40 15,48 16,46 17,44 18,36 19,18
21°C 8,60 10,22 11,59 12,92 14,21 15,36 16,40 17,44 18,41 19,27 20,19
22°C 9,54 11,16 12,52 13,89 15,19 16,27 17,41 18,42 19,39 20,28 21,22
23°C 10,44 12,02 13,47 14,87 16,04 17,29 18,37 19,37 20,37 21,34 22,23
24°C 11,34 12,93 14,44 15,73 17,06 18,21 19,22 20,33 21,37 22,32 23,18
25°C 12,20 13,83 15,37 16,69 17,99 19,11 20,24 21,35 22,27 23,30 24,22
26°C 13,15 14,84 16,26 17,67 18,90 20,09 21,29 22,32 23,32 24,31 25,16
27°C 14,08 15,68 17,24 18,57 19,83 21,11 22,23 23,31 24,32 25,22 26,10
28°C 14,96 16,61 18,14 19,38 20,86 22,07 23,18 24,28 25,25 26,20 27,18
29°C 15,85 17,58 19,04 20,48 21,83 22,97 24,20 25,23 26,21 27,26 28,18
30°C 16,79 18,44 19,96 21,44 23,71 23,94 25,11 26,10 27,21 28,19 29,09
32°C 18,62 20,28 21,90 23,26 24,65 25,79 27,08 28,24 29,23 30,16 31,17
34°C 20,42 22,19 23,77 25,19 26,54 27,85 28,94 30,09 31,19 32,13 33,11
36°C 22,23 24,08 25,50 27,00 28,41 29,65 30,88 31,97 33,05 34,23 35,06
38°C 23,97 25,74 27,44 28,87 30,31 31,62 32,78 33,96 35,01 36,05 37,03
40°C 25,79 27,66 29,22 30,81 32,16 33,48 34,69 35,86 36,98 38,05 39,11
45°C 30,29 32,17 33,86 35,38 36,85 38,24 39,54 40,74 41,87 42,97 44,03
50°C 34,76 36,63 38,46 40,09 41,58 42,99 44,33 45,55 46,75 47,90 48,98
The dew point table indicates at which surface temperatures condensation occurs. This is determined by the air temperature and relative humidity. Example: At an air temperature of 20°C and 55 % relative humidity, the dew point is at an object temperature of +10.7°C. The surface temperature should be 3°C above the dew point during application.
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Radiator paint brush DW light For dispersions and wall paints
Radiator paint brush DW light For dispersions and wall paints

RADBRSH-DW-LGHT-SZ50

High-quality radiator paint brush with light bristles for a uniform surface finish due to fine fibre tips
Work scissors
Work scissors

WRKSHRS-L250MM

Robust, high-quality, rust-proof scissors for professional applications
Stirring rod
Stirring rod

STIRR-F.PNT-450X35MM

For stirring and mixing
x 5 pcs
Soft PVC 1C liquid plastic primer
Soft PVC 1C liquid plastic primer

PRIM-LIQUIDPLASTIC-PVC-1LTR

Solvent-based 1-component primer for PVC substrates
x 1 pcs
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside

PROTGLOV-CHEM-NTR-330MM-SZ10

x 6 pcs
Cleaning cloth, textile
Cleaning cloth, textile

CLNRAG-TEXTILE-34X37CM-250PCS

For picking up coarse dirt, oils, greases, coolants and solvents
x 1 pcs
Crepe masking tape
Crepe masking tape

MASKTPE-CRP-38MMX50M

General masking tasks in the vehicle and painting fields, for smooth and painted surfaces
x 8 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details