Добро пожаловать в Würth Industry Только для коммерческих организаций

Shell end mill cutter

Самая популярная продукция в категории Shell end mill cutter
Shell end mill HSCo DIN 841 type NF
Shell end mill HSCo DIN 841 type NF

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and titanium and titanium alloys.

1 вариант

Перейти к вариантам
Shell end mill HSCo DIN 841 type H
Shell end mill HSCo DIN 841 type H

For hard, short-chipping materials such as grey cast iron, brass, bronze, alloyed tool steels.

1 вариант

Перейти к вариантам
Shell end mill HSCo DIN 1880 type HR
Shell end mill HSCo DIN 1880 type HR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 вариант

Перейти к вариантам
Shell end mill HSCo DIN 1880 type N TiAlN
Shell end mill HSCo DIN 1880 type N TiAlN

Recommended for milling difficult to machine materials up to a strength of 1,300 N/mm² and rust- and acid-resistant steels, titanium alloys etc.

1 вариант

Перейти к вариантам
Shell end mill HSCo DIN 1880 type HR TiAlN
Shell end mill HSCo DIN 1880 type HR TiAlN

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 вариант

Перейти к вариантам
Shell end mill HSCo DIN 841 type NR
Shell end mill HSCo DIN 841 type NR

Recommended for milling difficult to machine, high-strength materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 вариант

Перейти к вариантам