Similar Products
Similar Products

Rust converter

Rust converter
RUSTCON-CAN-1LTR
Art.-no.: 0893110
Selected article: Other versions
Questions? +49 7931 91-0
price/PU Prices for customers after login
x
Exclusively for trade customers Register now and access more than 125,000 products
Product information:
  • Safety data sheet 1
  • Technical data sheet 1 | 2
Specification
Environmentally friendly dispersion-based rust converter

Can be painted over

Can be painted over with all commercially available top-coat paint systems after 3 hours

Can be filled

Environmentally friendly, as dispersion-based

Reliably stops the corrosion process and provides an optimised application surface for additional paint work.

Rust converter penetrates into the rust, reacts with the rust and converts iron oxide into a stable, insoluble, blue-black, metal-organic complex.

Notice

Do not wash treated surfaces with water. Immediately wash the rust converter off painted surfaces. Do not use in direct sunlight, on hot surfaces over +40°C and when there is risk of frost. Protect from frost. Clean the equipment with water after use.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application
  • The surface must be clean, dry and free from grease
  • Remove dissolved rust, paint and dirt with a wire brush, scraper etc.
  • Apply a thin, even coat with a brush or roller and prevent runs
  • Paint within 48 hours
  • Observe the reaction times
  • Mask off surfaces not to be treated
Technical information

Contents

1000 ml

Colour

Cream

Shelf life from production

60 Month

Max. temperature resistance

120 °C

Suitable glove:
Permeation level: 6
Cotton velour lining
Permeation level: 6
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time Permeation level

< 10 min

0

≥ 10 min

1

≥ 30 min

2

≥ 60 min

3

≥ 120 min

4

≥ 240 min

5

≥ 480 min

6

Important information:
The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
 
In order to guarantee the best service possible, we make use of cookies. By using our services you agree to the privacy policy .
Top