Hammer rivet
Hammer rivet aluminium/A2
DWL-ALU/A2-4,8X15,3
Art.-no.
094548 15
EAN 4011231864268
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7931 91-0.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Stainless steel attachment with rounded mushroom head, rivet: Aluminium, bolt: Steel A2
- Easy installation by knocking in with a mason's mallet
- Stainless steel attachment with rounded mushroom head
- Clearly defined bolt knock-in securing mechanism for bridging cavities
- Stainless steel A2 mandrel for unrestricted use outdoors
Application area
Roof edge profiles for flat roof
Roof edge profiles for flat roof
Drill the hole
Guide hammer rivet in
Knock in flush with a hammer
Product information
Datasheets(X)
Application area
- Mounting of aluminium and sheet metal profiles, wall junction profiles, edging boards, smokestack seals, copings, light domes, moisture-proof roofing sheets, flange mountings, etc.
- Sheet/plate metal on pipes or other sheet/plate metal one below the other (mainly for lengths 13–19 mm)
- Can be used in concrete, pressure-resistant masonry, solid plaster, wood and substructures of roofs, walls and floors
Nominal diameter | 4.8 mm |
Sleeve length (l) | 15.3 mm |
Embedding depth in solid brick (h s) | 20 mm |
Nominal drill-bit diameter (d 0) | 5 mm |
Centre-to-centre distance (a) | 90 mm |
Edge clearance (a r) | 50 mm |
Drill hole depth (t) | 25 mm |
Hole diameter in component (d Bau) | 5 mm |
Embedding depth in steel (h s) | 4 mm |
Max. attachment height in steel (d a) | 9.5 - 12.1 mm |
| Performance data | |||
| Anchor diameter [mm] | 4,8 | ||
| Solid brick ≥ MZ20 | 0,35 | ||
| Sand-lime brick | 0,35 | ||
| Recommended Tensile load | Concrete ≥ C20/25 | Frec. [kN] | 0,34 |
| Characteristic values | |||
| Nominal diameter | 4,8 | ||
| for use in steel | 3–5 | ||
| Head height | [mm] | 1,6 | |
| Head∅ | d [mm] | 15,8 | |
| Nominal drill∅ | ddrl. [mm] | 5 | |
| Hole∅ in component | dcon [mm] | 5 | |
| Axis distance | arec. ≥ [mm] | 90 | |
| Edge distance | ar rec. ≥ [mm] | 50 | |
| Drill hole depth | t ≥ [mm] | 25 | |
| Setting depth | for use in solid brick | hS ≥ [mm] | 20 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!